MSX80 Snowgun Head

Price: from $499 US

Stand Options

Standard post mount $569.00 No Stand $498.00

With this pacakge you recieve the following:

-one professionally machined solid aluminum snowgun head, because it is built out of a single piece of aluminum, unlike competitors, there are significantly fewer freeze ups, the body will not rust, and the snowgun is much more durable than the PVC piping used by other manufacturers.

-2 custom water only snow making nozzles (installed), it has taken years of experimenting and custom machining to build these high quality exclusive snowmaking nozzles.

-1 custom atomizing nozzle (installed), it has taken years of experimenting and custom machining to build these exclusive high quality snowmaking nozzles.

-1 ten foot air line with quick connect fitting (attached to snowgun)

-1 ten foot high pressure water line with 22mm fitting (designed to fit most household pressure washers with flow rates of 1.3 gallons per minute to 2.5 gallons per minute, already attached to the snowgun)

-External Nucleation meaning that there is no possibility of the high pressure water ending up inside your air compressor, or air ending up inside you house hold water supply (professionally assembled and tested)

This snowgun requires:

- a pressure washer rated at least 1300psi with a flow rate of 1.3 - 2.5gpm (do not exceed this flow rating)

-an air compressor designed for continuous duty (must be oil lubricated) capable of producing 6CFM @ 40psi.

-temperatures below -2C or 28F to operate.

Stand Options:
Standard Post Mount: This mounting option allows for you to mount the snowgun directly into the ground or snow. This is the lightest option for mounting your snowgun.

No Stand: This mounting option allows for you to build your own stand, please make sure that your snowgun is mounted at least 4 feet above the ground to ensure good snow quality.

This item is currently sold out, please check back to order when it is next available

Stand Options

Standard post mount $559.00 No Stand $498.00