MakeSnow 50' High Pressure Hose 3/8"ID
Cost: $79.99US
Description: This is a solid rubber hose which has been designed to stand up to abrasion in commercial situations. The hose has a rated working pressure of 3000psi, and can be used with hot (up to 275 degrees Fahrenheit) or cold water. One end features a 3/8"MNPT swivel fittings to attach to your snowgun, the other end has the adapter (see immediately below) attached, so that it can be connected to any household pressure washer. Please note that the color of the hose is black.

Pressure Washer Adapter
Cost: $8.99US
Description: This is a pressure washer adapter which is designed to be attached directly to most small (1.3-2.5gpm) pressure washers. The fitting will convert the 22mm thread found on the pressure washer to 3/8" FNPT which can then be attached to a high pressure hose, and your snowgun.

Pressure Washer Adapter
Cost: $6.99US
Description: This adapter is used to adapt pressure washers which are designed to work with the pressure washer thread (most pressure washers with a plastic part which screws into the pressure washer use this system).  This fitting converts the pressure washer thread to 1/4" MNPT.

Pressure Washer Adapter
Cost: $8.99US
Description: This is a pressure washer adapter which is designed to be attached directly to most small (1.3-2.5gpm) pressure washers. The fitting will convert the 22mm thread found on the pressure washer to 1/4" MNPT which can then be attached to a high pressure hose, and your snowgun.

SOLD OUT